Constance - CLOSED-CUP FLASH POINT TESTER

CLOSED-CUP FLASH POINT TESTER

It is used to make determination of the closed cup flash point of the petroleum products.

Features

BK-FP261

* The heating power is adjustable and shown visually by voltmeter.

* The structure is designed small and exquisite with stainless-steel table board

BK-FP261A

* Simulation tracking displays function curves of heating up and test time.

* Automatically calibrate the effect of atmospheric pressure to test the corrected value.

* Differential coefficient detection.Automatically correct the system deviation.

* Automatically open the lid,detect the flash point and print test data.

* The test arm rises up and lowers down automatically.

* Igniting with electric igniting gun,forced air cooling.

Model	BK-FP261		BK-FP261A
Ambient Temperature	≤ 35℃		≤ 40℃
Relative Humidity	≤85%		≤80%
Consumption	650W		500W
Flash Point Determination	Mercury-in-glass thermometer.Specifications are as below: (1)Scale -5℃~110℃, division 0.5℃ (2)Scale 20℃~150℃, division 1℃ (3)Scale 90℃~370℃, division 2	Range: Ambient to 300℃ Repeatability: ≤3℃ Reproducibility: ≤4℃ Accuracy: 0.1℃
Oil Cup	- Inner diameter: 50.7mm~50.8mm -Depth: 55.7mm～56.0mm - The scribed line depth of capacity of testing oil: 33.9mm~34.3mm -Capacity of testing oil: about 70ml
Stirring Rate	Procedure A: (90～120)RPM, Procedure B: (250±10)RPM
Igniting Device	(1) Igniting source: gas(or other civilian fuels, the same below) (2) Electric ignition. Gas flame diameter: 3.2mm~4.8mm
Heating Device	The heating power is continuously adjustable from 0 W to 600W
Heating Rate	(1~12)℃/min; Controllable and adjustable	Procedure A: (5~6)℃/min, Procedure B: (1~1.6)℃/min
Power Supply	AC220V±10%, 50Hz
Dimension(WDH)	340320450mm	520360310mm
Packing Size (WDH)	470400410mm	600510600mm
Gross Weight	12.5kg	25kg

CLOSED-CUP FLASH POINT TESTER